Minolta DI2510 - Manual (Page 45)

3 3.2 Checking the Settings
3-4 Di2010/Di2510/Di3010/Di3510
B
e
fo
re
Ma
ki
ng
C
o
pi
es
Chap
ter
3
3.2 Checking the Settings
The currently selected settings can be reviewed. In addition, the specified settings
can be changed or stored for later use.
There are two screens that allow you to check the settings.
To check the settings
1 Press the [Mode Check] key in the
control panel.
The first screen showing the
current settings appears.
2 Touch [Next] to display the second
screen of settings.
3 Touch [Exit] to return to the Basics
screen.
✎
Tip
To change a setting, touch the button for the function that you wish to
change. The screen to change the setting for the selected function appears.
In the screen that appeared, change the setting as desired.
To change the settings
1 Press the [Mode Check] key in the
control panel.
The first screen showing the
current settings appears.
2 Touch [Next] or [Back] until the
screen containing the setting that
you wish to change is displayed.
3 Touch the button for the setting
that you wish to change.
The screen for specifying the
setting appears.
4 Change the setting according to the corresponding procedure.