Minolta DI2510 - Manual (Page 65)

4 4.1 Making Basic Copies
4-2 Di2010/Di2510/Di3010/Di3510
Ba
si
c C
o
py
Op
era
ti
o
n
s
Ch
apte
r 4
4.1 Making Basic Copies
The procedure for making basic copies is described below.
1 Position the document(s) to be copied.
❍ For details, refer to “6 Original Documents”.
2 Check that the [Copy] key
indicator is lit in green and that the
copier is in Copy mode.
❍ The Basics screen appears in
the touch panel.
3 Specify any necessary copy settings.
❍ To change the paper size (paper drawer), touch [Paper].
For details, refer to “Selecting the Paper Setting” (page 5-22).
❍ To change the zoom ratio, touch [Zoom].
For details, refer to “Specifying a Zoom Setting” (page 7-14).
❍ To sort, staple or punch holes in the copies, touch [Finishing].
For details, refer to “Specifying Finishing Settings” (page 7-2).
❍ To copy a book or copy while using less paper, touch [Orig. Ö Copy].
For details, refer to “Selecting the Orig. Ö Copy Settings” (page 7-18).
❍ To change the density of the copy, touch [Density].
For details, refer to “Selecting a Copy Density” (page 7-33).