Manitowoc Ice J-0600 - Manual (Page 3)

17. Make sure that all the tubing is not rubbing against
anything else in the machine.
18. Reinstall the corner post that was removed earlier
and place electrical cover on compressor.
19. Reinstall back panels of ice machine.
20. Make sure to replace start and run components
according to the machine you are replacing the
compressor in. See note in the beginning of
instructions for designation.
21. Reinstall all other panels.
22. Reconnect power and test run ice machine.
8006183
Sheet 3 of 3
06/25/01