Miller Electric DVI-2 R - Manual (Page 28)

.
A complete Parts List is available at www.MillerWelds.com
OM-232 386 Page 24
5-2. Weld Parameter Chart
Input Line
Voltage*
Parameter
Chart Settings
Higher
e.g. 240
Volts AC
230 Volts AC
Lower
e.g. 218
Volts AC
Weld Will Be
Hotter
Lower Settings
Use Parameter
Chart
Weld Will Be
Colder
Raise Settings
*Line voltage can affect weld output, settings on this chart are starting values only. You may need to adjust
voltage and wire feed speed to optimize your settings.