Metz Slim TV - Manual (Page 22)

22
11.1 Picture Settings for
Programmes via TV Menu
Opening the menu
Picture settings for individual programme
positions are not available in a 2 ** menu.
If the standard values do not provide a satisfacto-
ry picture in some programme positions, you can
make different settings for these positions which
override almost all of the general picture settings.
These individual settings apply only to the pro-
gramme position for which they are made, and
they cannot be overwritten with the
standard values. In addition to the
general picture settings, the individual
settings also include the settings colour
offset, colour standard and VCR.
Individual picture settings for
programme position xy:
• Select the programme position whose
picture settings you wish to change.
• Press the "MENU" key.
The TV menu appears on the screen.
• Press the blue key . The menu "Picture and
sound" and the menu item "General picture set-
tings" are pre-selected.
• Use the cursor control key ̆ to select the menu
item "Pic. settings for Pr." And press the "OK"
key.
• Use the corresponding numeric keys (in this
example:
²
for the CTI function) to select the
desired menu items.
• In the setting window, use the - + key to change
the setting.
• Press the "OK" key to save the new setting.
• Press the "EXIT" key to close the TV menu.
☞
MENU
VCR 3)
Colour standard 3)
Colour offset 3)
CTI 3)
Comb filter 2)3)
Noise reduction 3)
Picture sharpness
Colour intensity
Contrast
Sound set,.prog.pos
Sound settings, gen.
Pict.set.,prog.posn.
Pict. settings, gen.
CTI Aus
Change with
Accept value with.
OK
EXIT
OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
2) Possible only on sets equipped with this
function.
3) See glossary for an explanation.
– +
²