Metz Slim TV User Manual

Page 50

Advertising
background image

50

The Electronic Programme Guides are
broadcast by several different stations,
and the information is therefore present-
ed in various layouts. You can thus choo-
se between different EPGs with different
appearances.

• TV set with a single tuner: select the

EPG programme position and leave it
selected for 30 minutes

• TV set with two tuners: the TV set col-

lects the EPG data with the aid of the
second tuner.

Special notes:

All stations which are found by a station
search are displayed in the station table
and also listed in the EPG. Stations
which carry two different programmes at
different times of the day must be stored
in two programme positions (see Section
24).

You can select which stations are to be
listed in the EPG.

Normally, the data for all stations are
collected and displayed. If you wish to
exclude certain stations from the EPG,
proceed as follows:

• Press the "MENU" key to open the TV

menu.

• Press the white key

to display the

menu station table with the active pro-
gramme position marked.

• Press the F2 key to enable editing of

the station table.

• Press the cursor control key

̈ to move

to the subjects list.

• Press numeric key

·

to delete the

mark (x) at the beginning of the line
"Include station in EPG".

• If you wish to exclude further stations

from the EPG, use the cursor control
keys

̇ ̈ ̄̆ to select each station

and repeat the above step.

The data collection operation is interrup-
ted if:

- the Teletext function is called;

- a recording is programmed in the

menu "AV recording";

- a "timer recording” is active or will

start within one hour;

- the Teletext function "Subtitles" is acti-

vated.

If you switch the TV set to the standby
state during the data-collection opera-
tion, the green LED lights or "EPG" is
displayed to indicate that data collection
is still running.

20.2 Collecting EPG Data

Not possible with an external receiver !

Advertising