Special functions, Recording a programme with a timer, Setting a timer manually for a recording – Metz Slim TV User Manual

Page 41

Advertising
background image

41

18. Special Functions

Normal/Speech

Opening the menu

Opening the menu

Selection of "Normal" or "Speech" is des-
cribed in Section 12.1, "Tone Settings".

In this menu, you can temporarily select
"Normal" or "Speech". The selection
remains active until you switch to another
programme position, switch to standby
mode or switch the TV set off completely.

This setting has no effect of the setting des-
cribed in Section 12.1, "Tone Settings".

Special functions 2

1

Normal/Speech

9

Timer-Overview

0

Direct recording

F2

If you wish to record a programme which your

video recorder or DVD recorder cannot receive

directly because it does not have a suitable tuner

(such as DVB-T or DVB-C), you can use the "Timer

overview" to make such programmes available to

the recording device.

Setting a timer manually for a recording:

• Press the F2 key. If you press F2 brie-

fly, the function programmed for F2
(see Section 18.1, "Programming the
function keys") is executed.
If you hold down F2 for about two
seconds, all possible selections are
displayed.

• If all possible selections are displayed,

press the corresponding numeric key
(in the example:

¾

) to open the timer

menu.

• If a timer already exists, press the F1 key.
• The cursor is located at the left of the first line

"Record". The number of subjects and sections

Recording

Yes

Reminder

No

Pr ---

Date

--.--.

Start

--:--

End

--:--

VPS

No

Recording device

Videorecorder

Timer

Preview

17:23

Mon Tue Wed Thu

Fri

Sat Sun 29.04.

Change with .

:select.

:save the timer.

F2

F1

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

18. Special Functions

Recording a programme with a timer

OK

– +

– +

Advertising