Philips Magnavox MWD200GA - Manual (Page 15)

– 15 – EN
Functions
3 Select the desired item.
DISPLAY_TV ASPECT
TV ASPECT
STILL MODE 4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
3 Select the desired item.
AUDIO_DRC
DRC
DOWN SAMPLING
DOLBY DIGITAL ON
OFF
Hint
STILL MODE:
• Select “AUTO” usually.
• If you select “AUTO”,
automatically select the
best resolution setting
(FRAME or FIELD) based
on the data characteristics
of the pictures. (default).
• If you select “FIELD”,
the picture in the still
mode will be stabilized.
• If you select “FRAME”, the
picture in the still mode
will be highly defined.
• An individual picture
on the TV screen is
called a “frame”, which
consists of two separate
images called a “field”.
• Some pictures may be
blurred if you select
“AUTO” in the still
mode due to their data
characteristics.
You can change the display functions. Follow steps 1 to 2 on page 14.
DISPLAY menu
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to
2 on page 14.
AUDIO menu
4
SETUP
Hint
DRC:
• This function is
available only on
the discs which are
recorded in the Dolby
Digital format.
DOWN SAMPLING:
• When playing disc with
copyright protection,
the sound will be down
sampled at 48kHz, even
if you set to “OFF”.
DISPLAY Setting B
AUDIO Setting C
5 To exit the menu
SETUP
ENTER
ENTER
Hint
TV ASPECT:
• Select “4:3 LETTER BOX”, so
that black bars may appear on
the top and bottom of the screen.
• Select “4:3 PAN & SCAN” for
a full height picture with both
sides adjusted.
• Select “16:9 WIDE” if a wide
screen TV is connected to this unit.
4 5 To exit the menu
TV ASPECT: (Default: 4:3 LETTER BOX)
See Hint on the left.
TV ASPECT
STILL MODE 4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
DISPLAY_TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
ENTER ENTER ENTER
ENTER ENTER ENTER
STILL MODE: (Default: AUTO)
See Hint on the right.
TV ASPECT
STILL MODE AUTO
FIELD
FRAME
DISPLAY_STILL MODE
AUTO
FIELD
FRAME
ENTER ENTER ENTER
Select the
desired
setting.
ENTER
ENTER ENTER ENTER
DRC (Dynamic Range Control): (Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
DOLBY DIGITAL: (Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: Outputs a Dolby Digital Signals.
• PCM: Convert the Dolby Digital into PCM (2 channel).
DRC
DOWN SAMPLING
DOLBY DIGITAL ON
OFF
AUDIO_DRC
ON
OFF
DOWN SAMPLING: (Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
DRC
DOWN SAMPLING
DOLBY DIGITAL BITSTREAM
PCM
AUDIO_DOLBY DIGITAL
BITSTREAM
PCM
DRC
DOWN SAMPLING
DOLBY DIGITAL ON
OFF
AUDIO_DOWN SAMPLING
ON
OFF
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
Select the
desired
setting.
ENTER
Select the
desired
setting.
ENTER
Select the
desired
setting.
ENTER
Select the
desired
setting.
ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
E6C0SUD.indd 15 E6C0SUD.indd 15 2006/07/06 12:05:45 2006/07/06 12:05:45