Philips Magnavox MWD200GA - Manual (Page 7)

– 7 – EN
Setup
COAXIAL
COAXIAL
DIGITAL
AUDIO OUT
L R
AUDIO
OUT
R
L
Hint
• The audio source on a disc in a Dolby Digital Multi-channel
Surround format cannot be recorded as digital sound by an MD
or DAT deck.
• By hooking this unit up to a Multi-channel Dolby Digital decoder,
you can enjoy high-quality Dolby Digital Multi-channel Surround
sound as heard in the movie theaters.
• Playing a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
Stereo system
AUDIO
This unit
Playing 2 channel audio
Analog audio
input jacks
AUDIO OUT
(Analog)
DIGITAL
AUDIO OUT
Playing Dolby Digital
(Multi-channel audio)
Audio cable
(supplied)
Audio Coaxial
Digital cable
(commercially
available)
Dolby Digital decoder,
MD deck or DAT deck
Connection to an Audio System
* To complete these settings, refer to pages 14-15.
SETUP > AUDIO>
DOLBY DIGITAL
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
BITSTREAM
Connecting to the other equipment
(an MD deck or DAT deck etc.)
without Dolby Digital decoder.
PCM
Connection
Setting
Digital audio
input jack
Rear Terminals
S-VIDEO
OUT
COAXIAL AUDIO
OUT
VIDEO
OUT
DIGITAL
AUDIO OUT
L
R
1 S-VIDEO OUT jack
Connect an optional S-Video cable here through the S-Video in jack of a television.
2 VIDEO OUT jack
Connect the supplied yellow video cable here through the video in jack of a television.
3 AUDIO OUT jacks
Connect the supplied audio cable here through the audio in jacks of a television or other audio equipment.
4 DIGITAL AUDIO OUT COAXIAL jack
Connect an optional coaxial digital audio cable here through the coaxial digital audio in jack of a decoder or audio receiver.
3 4 2 1
E6C0SUD.indd 7 E6C0SUD.indd 7 2006/07/06 12:05:39 2006/07/06 12:05:39