Troubleshooting guide, Information, Hint – Philips Magnavox MWD200GA User Manual

Page 17

Advertising
background image

– 17 –

EN

Information

3

Select the desired
PLAYER MENU
Language, using the
number buttons
.

Troubleshooting Guide

If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit consulting the following checklist.

NOTES:
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s

Manual for more details on correct operations.

• Playback from a desired track and random playback are not available during program playback.
• Some functions are prohibited on some discs.

Information

Hint

• When you cancel to

initialize at step 2.
Press [SETUP] to
exit the menu.

<SETUP MENU>

Press
twice.

SETUP

STOP

ENTER

ENTER

ENTER

Problem

Solution

No power

– Check if the AC power cord is properly connected.
– Unplug the outlet once, and wait for 5-10 seconds and then plug it in again.

No sound or picture

– Check if the TV is switched on.
– Check the video connection.
– Check the VIDEO/AUDIO cable connections to the TV.
(See page 6.)

Distorted picture

– Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
– Connect the unit directly to the TV.

Completely distorted picture or
black/white picture with DVD

– Connect the unit directly to the TV.
– Make sure the disc is compatible with the unit.

No sound or distorted sound

– Adjust the volume.
– Check that the speakers are connected correctly.

No audio at digital output

– Check the digital connections.
– Check if the audio format of the selected audio language matches your receiver capabilities.

No DTS audio is output.

– This unit does not support DTS audio.

This is not a malfunction.

Picture freezes momentarily during
playback.

– Check the disc for finger prints/scratches and clean with a soft cloth wiping from center to edge.

Disc can’t be played.

– Clean the disc.
– Ensure the disc is inserted in correct direction.
– Check if the disc is defective by trying another disc.
– Cancel the parental lock or change the control level.
– Insert a correct disc that plays on this unit.
– Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.

No return to start-up screen when
disc is removed.

– Reset the unit by switching the unit off, then on again.

The unit does not respond to
the remote control.

– Aim the remote control directly at the sensor on the front of the unit.
– Reduce the distance to the unit.
– Replace the batteries in the remote control.
– Re-insert the batteries with their polarities (+/– signs) as indicated.
– Tune your radio to an empty AM station so that you hear a lot of noises. Then, turn the volume

up. If you hear some signal sound from the radio by pressing buttons on the remote control, the
remote control is working.

– Press and hold any button on remote control toward a digital camera. The remote control is

working if you confirm infrared light through the digital camera.

Buttons do not work or the unit stops
responding.

– To completely reset the unit, unplug the AC cord from the AC outlet for 5-10 seconds.

The unit does not respond to some
operating commands during playback.

– Operations may not be permitted by the disc. Refer to the instructions of the disc.

The unit cannot read CDs / DVDs.

– Use a commonly available cleaning CD / DVD to clean the lens before sending the unit for

repair.

Angle does not switch.

– The angle cannot be switched for DVDs which do not contain multiple angles. In some cases

multiple angles are only recorded for specific scenes.

Playback does not start
when the title is selected.

– Check the “PARENTAL” setting.

The password for rating level
has been forgotten.

– Enter the default password “4737”, then your forgotten password will be cleared.

ENTER

INITIALIZE_INITIALIZE

INITIALIZE

YES

LANGUAGE

AUDIO
SUBTITLE
DISC MENU
PLAYER MENU

ENGLISH

FRENCH

SPANISH

SELECT MENU LANGUAGE

1

2

3

1

Press [SETUP].

Reset to the Default Setting (Except for PARENTAL Setting)

F

2

Select “INITIALIZE”.

E6C0SUD.indd 17

E6C0SUD.indd 17

2006/07/06 12:05:46

2006/07/06 12:05:46

Advertising