Philips Magnavox MVR430MG - Manual (Page 24)

CH
3 2 1
6 5 4
9 8 7
0
POWER
STATUS/EXIT
MEMORY SLOW REC/OTR
SPEED TIME SEARCH STILL/PAUSE
VCR/TV EJECT
MENU
CLEAR
REW
PLAY
STOP
F.FWD
24 Playing
• If the tape you want to play is already
in the VCR, make sure the VCR power
is on and the VCR is in VCR position.
(The VCR/TV light will appear on the
display panel. If it does not, press the
VCR/TV button once.) Press the
PLAY/o button.
• Other playback options and features
are on pages 33-40.
• If REPEAT PLAY is ON, playback will
begin automatically when you insert a
tape, even when the record tab is
intact. Details are on page 33.
• Tape playback will not begin auto-
matically if a timer recording is set
and the VCR power is off. Details
are on page 37.
• If you used the AUDIO and VIDEO
OUT jacks to connect the VCR to the
TV, see
page 10. You need to choose
a channel other than 3 or 4 at the TV
to see the VCR image on your TV.
Helpful Hints
Read and follow the steps below to play a tape.
1 Turn on the TV and set it to channel 3 or 4, whichever
channel the CH3/CH4 switch on the back of the VCR is set
to.
2 Insert a tape in the VCR. The POWER, VCR/TV, and
CST. IN lights will appear on the display panel. If the tape’s
record tab is missing, playback will start automatically.
6 Press the EJECT button to remove the tape.
3 If playback does not start automatically, press the
PLAY/o button.
4 Press the STOP/p button to stop playback.
5 Press the REW(ind)/{ button to rewind the tape.
1
Turn on the TV.
2
Insert a tape in the VCR.
3
5 4
6
mvr630mg.QX33 2/11/02 12:05 PM Page 24