Philips Magnavox MVR430MG - Manual (Page 28)

CH
3 2 1
6 5 4
9 8 7
0
POWER
STATUS/EXIT
MEMORY SLOW REC/OTR
SPEED TIME SEARCH STILL/PAUSE
VCR/TV EJECT
MENU
CLEAR
REW
PLAY
STOP
F.FWD
DAILY PROGRAM (MON-FRI)
PROGRAM -1 2 3 4 5 6 7 8-
SELECT PROGRAM NUMBER
TO END PUSH EXIT
28 Timer Recording
Follow the steps below to program your VCR to record TV pro-
grams while you’re away from home. The VCR will turn itself on,
record, and turn itself off automatically. Before you begin:
● Set up the channels at the VCR. Details are on page 12.
● Set the clock. Details are on page 15.
● Put a tape in the VCR. Make sure the tape’s record tab is intact
and the tape is long enough to record the program(s).
● Make sure the VCR is in VCR position. The VCR/TV light will
appear on the display panel. If it does not, press the VCR/TV
button once.
Do each step within 60 seconds of the previous step.
1 Press the MENU button.
SELECT op CHOOSE B
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2 Press the PLAY/o button or the STOP/p button to
select PROGRAM, then press the F.FWD/B button.
SELECT op CHOOSE B
→ ONCE
DAILY
WEEKLY
PROGRAM REVIEW
TO END PUSH EXIT
3 Press the PLAY/o button or the STOP/p button to
select a ONCE, DAILY, or WEEKLY recording.Then,
press the F.FWD/B button.
● ONCE: The VCR will record a TV program on any day
you choose, up to 12 months away.
● DAILY: The VCR will record the same channel every day
from Monday to Friday – starting at the same time and
recording for the same length of time.
● WEEKLY: The VCR will record the same channel on the
same day, at the same time, and for the same length of
time every week.
Daily
Recording
(example)
• If you need to make a correction
while programming a timer record-
ing, press the CLEAR button until
the cursor is flashing on the item
you want to change. Then enter the
correct information.
Helpful Hint
2-3
1
mvr630mg.QX33 2/11/02 12:05 PM Page 28