Philips Magnavox MVR430MG - Manual (Page 25)

CH
3 2 1
6 5 4
9 8 7
0
POWER
STATUS/EXIT
MEMORY SLOW REC/OTR
SPEED TIME SEARCH STILL/PAUSE
VCR/TV EJECT
MENU CLEAR
REW
PLAY
STOP
F.FWD
Read and follow the steps below to record a television program.
1 Turn on the TV and set it to channel 3 or 4 - the
channel to which the CH3/CH4 switch on the back of the
VCR is set.
Recording 25
2 Insert a tape with its record tab intact in the VCR.
If playback begins, press the STOP/p button to stop the
tape.
3 If the VCR/TV light appears on the display panel, go to step
4.
If the VCR/TV light does not appear, press the
VCR/TV button once.
4 Press the SPEED button repeatedly until the desired
tape speed (SP or SLP) appears briefly on the
screen. (Details about tape speed are on page 30.)
5 Use the CH(annel) o/p button or the Number but-
tons to select the channel you want to record.
6 Press the REC(ord)/OTR button once to start
recording. The RECORD light will appear on the display
panel.
7 To pause the recording, press the STILL/PAUSE but-
ton once. The RECORD light will flash. To resume
recording, press the REC(ord)/OTR button or press
the STILL/PAUSE button again. The RECORD light will
come on again.
8 To stop recording, press the STOP/p button.
1
Turn on the TV.
2
Insert a tape in the VCR.
• If you press the REC(ord)/OTR button
when a tape is not in the VCR, NO
CASSETTE will flash on the screen.
• If you press the REC(ord)/OTR button
while a tape without a record tab is in
the VCR, the VCR will eject the tape
and PROTECTED CASSETTE CAN-
NOT RECORD will flash on the screen.
• For recording options, see pages 26-32.
• You can change the tape speed dur-
ing a recording, but some distortion
will appear on the tape.
• The VCR records in a preset volume.
• If you used the AUDIO and VIDEO
OUT jacks to connect the VCR to the
TV, see
page 10. You need to choose
a channel other than 3 or 4 at the TV
to see the VCR image on your TV.
Helpful Hints
5
7 4
6
8
3
mvr630mg.QX33 2/11/02 12:05 PM Page 25