Midland Radio SP-300 - Manual (Page 19)

Page -16-
May 2001
MAXON
SP-300 HAND HELD
REMOVING & REPLACING THE BACK
COVER
To remove the Back Cover:
1. Remove battery. (Refer to Removing &Replacing
the Battery)
2. Unscrew the four Back Cover mounting screws
located on the Back Cover of the radio.
3. Remove the Back Cover by pulling the lower battery
bracket away from the radio.
4. The Back Cover can now be removed by pulling the
Back Cover away from the radio chassis. The self
forming gasket ring (A) should remain on the Back
Cover.
To replace the Back Cover:
1. Reverse the steps taken to remove the Back Cover.
ANT
CH CH
VOL
4 3
2 1
A 3
ANT
CH CH
VOL VOL
4 3 2 1
Figure 9A-Back Cover Removal & Installation
Figure 8B-Back Cover Removal & Installation
Figure 8-Back Cover Removal & Installation