Motorola MC9S12GC-Family - Manual (Page 86)

Device User Guide — 9S12C128DGV1/D V01.05
86
A.1.6 ESD Protection and Latch-up Immunity
All ESD testing is in conformity with CDF-AEC-Q100 Stress test qualification for Automotive Grade
Integrated Circuits. During the device qualification ESD stresses were performed for the Human Body
Model (HBM), the Machine Model (MM) and the Charge Device Model.
A device will be defined as a failure if after exposure to ESD pulses the device no longer meets the device
specification. Complete DC parametric and functional testing is performed per the applicable device
specification at room temperature followed by hot temperature, unless specified otherwise in the device
specification.
A.1.7 Operating Conditions
This chapter describes the operating conditions of the devices. Unless otherwise noted those conditions
apply to all the following data.
Table A-2 ESD and Latch-up Test Conditions
Model Description Symbol Value Unit
Human Body
Series Resistance R1 1500 Ohm
Storage Capacitance C 100 pF
Number of Pulse per pin
positive
negative
-
-
3
3
Machine
Series Resistance R1 0 Ohm
Storage Capacitance C 200 pF
Number of Pulse per pin
positive
negative
-
-
3
3
Latch-up
Minimum input voltage limit -2.5 V
Maximum input voltage limit 7.5 V
Table A-3 ESD and Latch-Up Protection Characteristics
Num C Rating Symbol Min Max Unit
1 C Human Body Model (HBM) V
HBM
2000 - V
2 C Machine Model (MM) V
MM
200 - V
3 C Charge Device Model (CDM) V
CDM
500 - V
4 C
Latch-up Current at 125
°
C
positive
negative I
LAT
+100
-100
- mA
5 C
Latch-up Current at 27
°
C
positive
negative I
LAT
+200
-200
- mA