Tv front panel – MITSUBISHI ELECTRIC WD-57732 User Manual
Page 14
14
Chapter 1. Television Overview
Lift cover to use features on
the front panel.
TV Front Panel
A/V Reset
If you wish to reset the A/V (Audio/Video) settings back to
the factory defaults:
• To reset all settings at once, press
GUIDE and FORMAT on
the front panel at the same time.
• To reset the defaults for individual devices, use the
A/V Memory Reset selection on the Audio/Video
menu.
Front Panel Controls and Indicators
1. Shaded buttons are duplicates of
keys on the remote control
2. POWER/TIMER indicator—lit
during normal operation; flashing
when auto-on TV Timer is set
3. LAMP indicator shows lamp condi-
tion (usually off during normal TV
operation)
4. STATUS indicator (off during
normal TV operation)
5. SYSTEM RESET (see description
this page)
Control Panel
The shaded buttons on the front control panel dupli-
cate keys on the remote control. The upper labels show
control functions when no TV menus are displayed;
the lower labels indicate functions when TV menus are
displayed or when a special function has been activated.
See “Remote Control Overview” in chapter 4, “TV Opera-
tion and Features,” for further details on the functions of
these buttons.
System Reset Button
If the TV does not respond to the
remote control, front panel controls,
or will not power on/off, press the
SYSTEM RESET button on the front panel
with a pointed object, such as the point
of a pencil or end tip of a paperclip.
The green LED will flash quickly for
about one minute. When the green LED stops flashing,
you may turn on the TV. The changes you made most
recently, before using
SYSTEM RESET, may be lost.
������
�������
1
5
Right:
INPUT 3
and controls on
front panel
Input 3
INPUT 3 provides an easily accessible set of standard
audio/video jacks. These jacks allow for convenient con-
nection of a camcorder or other audio/video device. Note
that if you connect to the
S-VIDEO jack, the VIDEO
jack is deactivated.
2
3
4
1
Memory Card Reader
(models WD-57732, WD-65732, WD-73732)
The memory card reader has four card slots that accept a
variety of popular memory card types. The reader lets you
view JPEG pictures from many digital cameras and allows
you to listen to MP3 or WMA audio files recorded from
computers or other digital recording devices.
The card slots are designed for the specific types of
cards listed below. Other cards or objects should not be
inserted into the slots as this may damage the TV. See the
discussion of memory cards in chapter 4 “TV Operation
and Features” for details about JPEG, MP3 and WMA file
types that are compatible with the TV.
Card Compatibility
A. CARD 1
SmartMedia™
B. CARD 2
MultiMediaCard™
Secure Digital (SD)
C. CARD 3
CompactFlash® (Types I and II)
Microdrive®
D. CARD 4
Memory Stick PRO™
Memory Stick™
�����������������
��
������� ������������
�
�
����������
�
��������������������
��
������� ���������������
��
�
�������
A
D
B
C