Dvd player with component video, A/v receiver (sound system), Important – MITSUBISHI ELECTRIC WD-57732 User Manual

Page 27: Chapter 2. tv connections, Tm r

Advertising

Chapter 2. TV Connections

DVD Player with Component Video

Component video cables and analog audio cables are

required. These are not included with the TV.

1. Connect the component video cables from

Y PB PR

VIDEO OUT on the back of the DVD player to the
COMPONENT jacks on the TV back panel, match-
ing the red, green, and blue colored connections.

2. Connect left (white) and right (red) stereo audio

cables from

AUDIO OUT on the back of the DVD

player to

COMPONENT/AUDIO LEFT and

RIGHT on the TV back panel.

��

�

��

�

��

�

��

�

��

�

��

�

��

��
��

��

�

��

�

��

�

��

Figure 10. Connecting a DVD player with component video

IMPORTANT

See Appendix B for component video signal
compatibility information.
For digital audio connections to your
A/V receiver, see your DVD player and A/V
receiver Owner’s Guides.

A/V Receiver (Sound System)

Most setups require either a digital audio cable or analog
stereo audio cables.

The TV makes all audio available in digital and analog

formats. Analog audio coming into the TV is available
in digital format on the

DIGITAL AUDIO OUT jack.

Digital incoming audio is available in analog format on the

AUDIO OUT LEFT/RIGHT jacks. Usually, only one of

the following connections is required:

• To connect an analog A/V receiver

Connect left (white) and right (red) audio cables from

AUDIO OUT/LEFT and RIGHT on the TV back

panel to the

TV AUDIO INPUT on the A/V receiver.

• To connect a digital A/V receiver with Dolby

Digital surround sound and PCM audio support

Connect one end of the digital audio cable to

DIGITAL AUDIO OUT on the back of the TV.

Connect the other end to the

COAXIAL DIGITAL

INPUT on the back of the A/V receiver.

��

�

��

�

��

�

��

�

��

�

��

�

��

��
��

��

�

��

Figure 11. Connecting audio from the TV to an A/V
receiver

Note:

On rare occasions, an HDMI signal may be

copy-restricted and cannot be output from the TV
as a digital signal. To hear these copy-protected
signals through the A/V receiver, use connections
for analog A/V receivers.

Check the A/V receiver’s Owner’s Guide for

information concerning use of the digital input
and switching between digital sound and analog
stereo sound from the TV.

Advertising

Popular Brands

Popular manuals