Minolta CF3102 - Manual (Page 151)

8 Troubleshooting
8-20 CF2002/CF3102
8 Open the transport guide, and then
pull out any paper in the transport
section.
❍ If the paper cannot easily be
pulled out, stop trying to pull it
out. Pulling out the paper with
too much force may damage the
folding unit.
❍ If the paper cannot be pulled out
easily, turn the misfeed-
clearing dial in the folding
section as described in the
following step, and then pull
out the paper.
9 Turn the misfeed-clearing dial in the
folding section clockwise. Feed out
into the lower output tray the paper
that could not be fed out in step 8,
and then pull out the paper.
10 Slowly pull out the stapler unit as far
as possible.
11 Turn misfeed-clearing dial
clockwise until the cartridge
removal indicators are aligned. The
staple cartridge moves to a position
from where it can be removed.
❍ If the dial is turned too far, turn it
counterclockwise to adjust it so
the cartridge removal indicators
are aligned.
CF2002.book Page 20 Friday, June 13, 2003 9:29 AM