Minolta CF3102 - Manual (Page 42)

Features and Components 3
CF2002/CF3102 3-17
* The internal options are not shown.
13 Copier Stand CS-2 (optional) Reduces the installation area required for the
equipment if the scanner is installed on the top of the
stand and the printer is installed on the inside
Referred to as the copier stand throughout the
manual
14 Punch KIT PK-4 (optional)* Allows the hole-punching function to be used if
installed onto finisher FN-8
15 Memory M256-2 (optional)* Increases the memory of the copier to 512 MB (256
MB standard memory + 256 MB expanded memory)
By expanding the memory, the number of pages that
can be stored in the memory can be increased.
(Refer to Supplemental Table 1.)
Referred to as the memory throughout the manual
16 Hard Disk Drive HDD-5
(optional)* By installing the hard disk, the “Distribution” function
can be used. In addition, the number of pages that
can be stored in the memory can be increased.
(Refer to Supplemental Table 1.)
17 Printer Controller
CN3101e (optional)* Internal printer controller that allows the copier to be
used as both a color printer and a color scanner
configured into a computer network
For more details, refer to the manual of the printer
controller.
18 Printer Controller CN3102Pro
(optional)* External printer controller that allows the copier to be
used as both a color printer and a color scanner
configured into a computer network
For more details, refer to the manual of the printer
controller.
19 Printer Controller
CN3102e (optional)* Stationary printer controller that allows the copier to
be used as both a color printer and a color scanner
configured into a computer network
For more details, refer to the manual of the printer
controller.
No. Part Name Description
CF2002.book Page 17 Friday, June 13, 2003 9:29 AM