Minolta CF3102 - Manual (Page 57)

3 Features and Components
3-32 CF2002/CF3102
* Job: Any set of consecutive operations, such as those for making copies, scans or computer
printouts
8 [Interrupt] key • Press to enter Interrupt mode.
• When the [Interrupt] key is pressed, the key
indicator lights up in green to indicate that the
machine is in Interrupt mode. In addition, the
message “Now in the Interrupt mode” appears on
the touch panel.
• To cancel Interrupt mode, press the [Interrupt]
key again.
9 [Panel Reset] key • Press to reset all copy modes and functions to
their default settings. (All selected settings* are
canceled.)
• The current job is canceled.
*Stored zoom ratios, stored job settings, and
interrupted or delayed jobs are not canceled.
10 [C] (clear) key • Press to reset the number of copies to “1”.
• Press to erase a setting, such as the zoom ratio
or size, selected using the keypad.
• The scanned image is erased.
11 [Stop] key • Press to stop a copy operation.
• Scanning of a document is stopped.
12 [Start] key • Press to start a job.
• If this key is pressed during a continuous copy
operation, scanning for the job begins. (Queued
copy - for details refer to the Advanced User
Manual on the CD) .
• Press to continue an interrupted copy job.
• If this key is pressed while the copier is warming
up, scanning for the job begins. (Queued copy -
for details refer to the Advanced User Manual on
the CD).
• The key indicator lights up in green to indicate
that jobs can be queued. The key indicator lights
up in orange to indicate that no jobs can be
queued.
13 Control panel release lever • Use when adjusting the angle of the control
panel.
• Pull the release lever, and then push down on the
control panel to adjust its angle.
14 [Enlarge Display] key • Press to display the touch panel screens
enlarged.
• In the Enlarge Display mode, the controls for
frequently used functions are enlarged, making
them easier to read.
(See Advanced information on CD-R)
15 Contrast-adjusting dial • Use to adjust the contrast of the touch panel.
No. Part Name Description
CF2002.book Page 32 Friday, June 13, 2003 9:29 AM