Minolta CF3102 - Manual (Page 125)

7 Replacing Parts and Supplies
7-6 CF2002/CF3102
7.2 Replacing the Staple Cartridge
When finisher FN-116 or FN-8 is installed and is about to run out of
staples, a warning message appears.
✎
Note
Be sure to replace the staple cartridge only after the message
appears, otherwise the machine may be damaged.
To replace the staple cartridge for FN-116
1 Slide the finisher away from the
copier.
2 Turn the dial to the left in order to
position the stapler at the center.
3 Pull the staple holder out toward
you.
Stapler
CF2002.book Page 6 Friday, June 13, 2003 9:29 AM