Minolta CF3102 - Manual (Page 91)

5 Original Documents
5-4 CF2002/CF3102
Document Precautions (Multi-Sheet Feeding)
The following types of documents should not be used, otherwise paper
misfeeds or damage to the document may occur. Instead, these types of
documents should be fed manually.
● Rolled documents
● Wrinkled or torn documents
● Folded documents (folded in half or fanned)
● Highly translucent or transparent documents, such as overhead
transparencies or diazo photosensitive paper
● Documents with binder holes (2 or 3 holes)
● Documents with many binder holes, such as loose-leaf paper
● Coated documents, such as heat-sensitive or carbon-backed paper
● Inkjet printer paper
● Documents just after printed with this copier.
Document Precautions (Manual Feeding)
The following precautions should be observed when manually feeding the
types of documents listed below. Handle the documents as described.
● For non-standard-sized documents:
The document size cannot be detected automatically, therefore, the
Paper setting “Auto Paper” and the Zoom setting “Auto Size” cannot
be used. In the Basic screen, touch [Paper], and then select the
appropriate paper size setting. For details on selecting the paper size,
refer to page 3-9.
● For highly translucent or transparent documents, such as overhead
projector transparencies or diazo photosensitive paper:
The document size cannot be detected automatically. Place a blank
sheet of paper of the same size as the document over the document.
● For thick objects, such as books:
With thick books, the original cover, or the duplexing document feeder
if it is installed, cannot be closed. Scan the document without closing
the original cover or the duplexing document feeder. Do not place
objects exceeding 2 kg on the original glass. In addition, if a book is
placed on the original glass, do not press it down extremely hard,
otherwise the original glass may be damaged. (The original glass can
withstand a weight of 2 kg.)
CF2002.book Page 4 Friday, June 13, 2003 9:29 AM