M-AUDIO Digital Recording Interface Delta 44 - Manual (Page 8)

8
Windows NT 3.51 Installation
1. Install the hardware in your system, then power up your system & boot
Windows NT Ver 3.51.
2. Click and open the “Main” group.
3. Click and open the “Control Panel.”
4. Click on the “Drivers” icon.
5. Click on the “Add” button.
6. Select the “Unlisted or Updated Driver” entry and push “OK.”
7. You will be prompted to insert the driver disk,, with the A: prompt appearing as
the path. Insert the Drivers CD into your CD ROM drive. Type in the drive letter
of your CD drive (we will assume here that it is D:\) and the path to the Delta
drivers, which will be D:\DeltaSeries\Delta_NT. Click OK.
8. When the “Add Unlisted or Updated Driver” window pops up, select the “M
Audio Delta Interface Card” entry and click “OK”.
9. In order for the driver installation to be completed you will be required to exit
and restart Windows.
Macintosh Installation
1. Open the System folder on your Macintosh hard drive. In the System folder,
locate the Extensions folder.
2. On your Drivers CD disk, open the Delta Products folder, then the Delta 44
folder. Place the extension file "Delta 44 Driver" in your Extensions folder by
clicking on it and dragging it to the Extensions folder.
3. If you are using a music program that uses ASIO drivers, it will also have an
ASIO folder within the application’s folder. In your Mac Delta Drivers folder
you will find three Delta 44 ASIO drivers. For Cubase versions 4.x, use the
"ASIO2 Delta44" driver. For Metro, or earlier versions of Cubase, use the
"ASIO Delta44v3" driver. For any music program that is not ASIO2 capable,
use the “ASIO Delta 44” driver instead (check your program’s documentation).
Place the file "ASIO Delta" in your program's ASIO folder by clicking on it and
dragging it to the ASIO folder.
4. Drag the "DeltaPanel PPC" file onto your Macintosh hard drive. You can run
the Delta Control Panel from any place that's convenient, though music software
applications that use ASIO will allow you to launch the Delta panel from within
the program. If not, we suggest creating a alias to the control panel by
highlighting it and pressing Command (Apple key)+M. Then, drag the alias to
the desktop.
5. With the Delta 44 PCI card installed, restarting the computer will load the Delta
44 extension. You will be able to visually see the Delta extension icon pass by
as your system loads extension.
6. Go to the Apple menu |Control Panel | Sound. You should see the “built-in”
sound icon, plus the Delta icon if your Delta 44 is properly installed. If your
music program does use ASIO, leave the Sound Manager driver set to "built-in"
for both Sound In and Sound Out. If your program does not use ASIO (check