Memorex iWake Mi4004 - Manual (Page 10)

9
OPERATION
With an iPod ® connected (see
previous page), turn the Mi4004 on by
pressing the Power button (if it is not
on already); “iPod” will appear in the
display.
NOTE: If the Mi4004 is in a mode
other than iPod ® , press the
iPod ® /LINE IN button to select iPod ®
mode.
1 1
1
Operate the iPod ® as per its
owner’s manual and the sound will
be heard through the Mi4004’s
speakers.
Adjust the volume as desired by
pressing the Volume Up/Down
buttons.
1 1
2
For private listening, plug in
headphones into the Headphones
jack on the rear of the Mi4004. The
speakers will be disconnected
when headphones are plugged in.
When done, press the Power
button and also turn off the iPod ® .
1 1
3
USING AN IPOD ® WITH THIS UNIT
NOTES:
• When the iPod ® is inserted
into the dock, you can press
the TUNE Up/Down/Skip n / o
buttons to skip to the
beginning of the current
track/previous or next track.
• The default volume setting
level is 6. After you have
adjusted the volume setting, if
you turn the unit off and then
on again, the volume level will
be set back to the default level
of 6.