Memorex iWake Mi4004 - Manual (Page 11)

10
OPERATION (CONTINUED)
Turn the Mi4004 on by pressing the
Power button; "AM" or "FM" will
appear in the display.
1
1
Press the AM/FM button
repeatedly to select the desired
band (AM or FM).
1
2
Repeatedly press the TUNE
Up/Down/Skip n / o buttons to manually
advance the frequency in the display up
or down until the desired frequency
appears.
For auto tuning, press and hold the
TUNE Up/Down/Skip n / o buttons until
the frequency in the display starts to scan
and then release; the tuner will search
and then stop on the next strong station it
finds. Repeat this step until the desired
frequency appears in the display.
NOTE: When a station is tuned, after five
seconds, the radio frequency will
disappear and the actual time will
reappear in the display. If you press the
TUNE Up/Down/Skip n / o buttons, the
radio frequency will appear in the display
again.
1
3
Adjust the volume as desired by
pressing the Volume Up/Down
buttons.
For private listening, plug in
headphones into the Headphones
jack on the rear of the Mi4004. The
speakers will be disconnected
when headphones are plugged in.
1
4
USING THE RADIO
Antennas
FM: Unravel and extend the FM wire antenna for best reception.
AM: Turn the unit for better AM reception. Also, move the AC adapter 1.5ft. away from the
main unit to prevent interference to the AM signal.