Operation (continued) – Memorex iWake Mi4004 User Manual

Page 14

Advertising
background image

13

OPERATION (CONTINUED)

NOTES:

It is not necessary to set the volume level for the alarm. When the alarm

time is reached, the alarm volume level will be set to the minimum (Level

1) and it will increase one step every five seconds continuously until

Volume Level 12 is reached.

When the actual time matches the selected preset alarm time(s), if set to

Radio or Buzzer, the unit will automatically turn on for 20 minutes and

then shut off. If set to iPod

®

, the unit will start playback on the track that

you selected and the tracks following it in the playlist. The unit will

playback for 20 minutes then turn off automatically or, if the remaining

playlist has less than 20 minutes of playback time remaining, the unit will

just playback the remaining time of the playlist and then stop.

TO SHUT OFF THE ALARM, see TO SHUT THE ALARM OFF section on

the next page.

While the alarm is sounding, if the other alarm reaches the alarm time, the

first alarm will stop sounding and the second alarm will start sounding.

Make sure you have disconnected the headphones from the Headphones

jack (rear of the unit) and disconnected the audio cable from the LINE IN

jack (rear of the unit); otherwise, there will be no sound when the actual

time matches the preset alarm time.

If set to iPod

®

, insert the iPod

®

as shown on

page 8. Then, using the controls on the iPod

®

,

select the track that you would like to wake to

and put the iPod

®

into Pause mode. DO NOT

turn the iPod

®

off; let it go to sleep by itself.

When the alarm time is reached, the unit will

start playback on the track that you selected

and the tracks following it in the playlist. The

Mi4004 will playback for 20 minutes then turn

off automatically or, if the remaining playlist

has less than 20 minutes of playback time

remaining, the Mi4004 will just playback the

remaining time of the playlist and then stop.

5

Advertising