Matrox Electronic Systems LE G450 - Manual (Page 43)

Matrox Graphics Card – User Guide 43
2 Under Font size , select Large Fonts .
3 Click OK to close the dialog box and apply changes.
Problem Poor TV or video recorder image quality
1 Cause Your software TV settings may need adjusting.
1 Solution See “Software setup”, page 23 .
2 Cause There may be too many video devices between your video source and destination, or one or
more of the video devices may be degrading the quality of the video signal. Demodulators,
long cables, cable extensions and improper connections can all affect video signal quality.
1 Solution If your video equipment supports it, use S-video connections. For more information, see
“Connection setup”, page 20 .
2 Solution Try changing one or more video devices.
3 Solution If possible, use fewer connections. For example, don’t use cable extensions.
3 Cause The image settings on your TV may need adjusting.
1 Solution Some TVs have an aperture control sometimes called PICTURE . Lowering this setting may
reduce this problem. Reducing your TV’s brightness setting may also improve image quality.
For more information, see your TV manual.
Problem Can’t record video with a video recorder
1 Cause The video source may be copy protected. Your Matrox product may not let you make copies
of copy-protected video. (Some video sources let you make a copy of a video, but you may
not be able to make a copy of that copy.)
1 Solution To get copies of a copy-protected video, contact the vendor of the video.
Problem Video appears stretched or squished on a TV
1 Cause Windows 98/Me/2000/XP – If you’re using the DualHead DVDMax feature to view video
full-screen on your TV, the aspect ratio of a video may not match the aspect ratio of your TV.
1 Solution Adjust software settings:
1 Access the Matrox PowerDesk DualHead property sheet ( see “Accessing PowerDesk
property sheets”, page 9 ).