Matrox Electronic Systems LE G450 - Manual (Page 4)

4 Matrox Graphics Card – User Guide
Connection setup
For the purpose of determining your connection setup, there are 4 types of graphics cards:
! HD-15/HD-15 – two HD-15 (blue)
connectors
! HD-15 only – only an HD-15 (blue)
connector
! DVI/HD-15 – a DVI (white) and an HD-15
(blue) connector
! DVI only – only a DVI (white) connector
If your graphics card has two
HD-15 (analog) connectors,
simply plug your monitor cables into the
connectors on your Matrox card. Make sure
each end of the monitor cables are properly
connected and fastened.
If your graphics card only has an
HD-15 connector,
simply plug your
monitor cable into the connector on your
Matrox card. Make sure each end of the
monitor cable is properly connected and
fastened.
WARNING: Don’t change monitor connections while your computer is turned on. While
your computer is turned on, it may be using monitor settings that are specific to the current
monitor connections. Some devices may be permanently damaged if incorrect settings are
used.
HD-15 HD-15
HD-15
DVI HD-15
DVI
Main
connector
Secondary
connector
If you only have
one monitor,
use this connector.
HD-15
connector