Micron Technology MERIDIAN 850 - Manual (Page 56)

56
Date and Time
Provides a single window for setting the system date and time. The Date
and Time window lets you specify the date, month, and year as well as the
Hour, Minute, and Second.
Fast Boot
Initializes and quickly boots the system in a few seconds by bypassing
certain diagnostic tests. To fully test the system at power-on time, turn off
Fast Boot. This makes the system perform a more comprehensive test of
the hardware, which makes the bootup process longer. A check mark
indicates Fast Boot is enabled.
Boot Device
Specifies where the system boots from.
Available devices: Diskette A, Hard Disk C, or PCMCIA Card (PCMCIA
SRAM only).
Video Select
Selects the display type that will be used when the system boots up. Avail-
able options from the Video Select menu include: LCD Only, CRT Only, or
Simulscan. LCD Only specifies that a Liquid Crystal Display (or equivalent
panel) is used; CRT specifies that an external Cathode Ray Tube is used;
Simulscan specifies that both an LCD and CRT will be displayed simulta-
neously when the system boots.
LCD Max Brightness
Sets the LCD panel to the maximum brightness.
Chapter 5 - Using SETUP
MERID850.PM5 7/17/95, 9:13 AM 56