Micron Technology MERIDIAN 850 - Manual (Page 61)

61
Hard Disk
Configures the Hard Disk Drive 1 (DOS drive C:). Options:
[Disabled]
If no hard drive is installed.
[Standard] To select a drive type from a standard list of drives.
(44 pre-defined drive types are listed).
[Custom] To configure a drive not in the standard list.
When selected, you must manually enter the values for
cylinders, heads, sectors per track (SPT), landing zone
(LZone), and write precompensation (Precomp) for the
drive to be recognized.
[Auto-ID] Attempts to configure the hard drive parameters for any
supported IDE drive.
Fast Hard Disk
Enables or disables the turbo IDE interface. When enabled, your system
can access the hard disk much more quickly.
Chapter 5 - Using SETUP