Microsoft STOREXPRESS DSE4XM1 - Manual (Page 33)

March 10, 2009 Dolphin Interconnect Solutions 33
www.dolphinics.com
Message:
Error: The ioDrive(x) initialization failed with error code 0xerrorcode (where errorcode
is a number which may vary)
Suggested Solutions:
• Reinstall the Windows driver
• Remove and reseat the ioDrive device
• Remove and insert the ioDrive in a different PCIe slot
If these do not correct the error, please contact Dolphin Customer Support.
Message:
Error: The ioDrive(x) was not attached. Use the fio-attach utility to rebuild the drive.