Microsoft STOREXPRESS DSE4XM1 - Manual (Page 46)

March 10, 2009 Dolphin Interconnect Solutions 46
www.dolphinics.com
ioDimm3 SN:0719 PN:001195011, Mfr:000 Date:20080709
Firmware v11791
92 GBytes, 8192 blocks, 256 pages, 47264 bytes/page (25 pads, 1 plane, 4
banks)
Nand: Samsung (ec) SLC
Error correction: 11 bits per 240 bytes, retire above 4 bits
FPGA ID:000 UID:0000000002cf01326845000048f00c00
PCI: 02:00.0, Slot Number:2 Vendor ID: 1aed Device ID: 1003
Ambient temperature: 40 degC
Internal temperature: avg 44.3 degC, max 50.7 degC
Media status: healthy. 99.78% blocks good. data:99.77% good, md:100%
fct12 Not attached
ioDimm3 SN:0299 PN:001160002, Mfr:AEMS Date:20080724
Firmware v11791
154 GBytes, 8192 blocks, 256 pages, 78848 bytes/page (20 pads, 1 plane, 4
banks)
Nand: Samsung (ec) SLC
Error correction: 11 bits per 240 bytes, retire above 4 bits
FPGA ID:xc5vlx110t-ff1136-1 UID:00000000012b01326854000046cd0801
PCI: 03:00.0, Slot Number:3 Vendor ID: 1aed Device ID: 1001
Ambient temperature: 34 degC
Internal temperature: avg 37.9 degC, max 42.8 degC
Media status: healthy. 99.87% blocks good. data:99.82% good, md:100%
fio-update-iodrive
Description
Updates the ioDrive’s firmware. This utility scans the PCIe bus for all attached ioDrives
and updates up to 256 total devices. Each ioDrive displays a progress bar and
percentage as the update completes. To update one or more specific devices, use the -d
option along with the PCIe bus address to identify which device to update. This utility
requires the device driver be loaded to operate. It also requires a complete power down
of the computer after using fio-update-iodrive to ensure a complete reset and
installation of the firmware.
Caution: The default action (without using the “–d” option) is to upgrade all ioDrive
devices with the updated firmware contained in the
<ffffile> file. Confirm that all
devices need the upgrade prior to running the update. If in doubt, use the –p Pretend
option to view the possible results of the update.
Syntax
fio-update-iodrive <iodrive_version> [-d, -f, -l, -p, -q, -h, -v]
where <iodrive_version> is the path and firmware archive file.