Microsoft STOREXPRESS DSE4XM1 - Manual (Page 10)

March 10, 2009 Dolphin Interconnect Solutions 10
www.dolphinics.com
Figure 2–2 DSE4XM Chassis Front
Caution: For protection of the StorExpress devices, we recommend that you do not attempt to
service or remove the cover of your DSE4XM chassis. However, if you do, power should
be disconnected from the chassis prior to servicing the chassis or removing the cover
for any reason. In order to disconnect power remove the power cord from its receptacle
in the back of the chassis as shown in Figure 2–1. The front power switch is not a dis-
connect switch for system power.
2.2 Installing DXH510 Card in Server
The DXH510 host adapter card is shown in Figure 2–3. The connector ports P0 and P1
are labeled in this figure.