Microsoft STOREXPRESS DSE4XM1 - Manual (Page 32)

March 10, 2009 Dolphin Interconnect Solutions 32
www.dolphinics.com
3.3 Troubleshooting Event Log Messages
The Windows System Event Log will display fiodrive messages concerning the
ioDrive—both Informational and Warnings.
Note: Each ioDrive is numbered from 0 upwards. These numbers reflect the PCIe bus
number where you installed the device. Use ioManager to view this number for your
device.
The following are the most common Event Log error messages.
Message:
Error: ioDrive(x) firmware is too old. The firmware must be updated.
Suggested Solution:
Use the firmware upgrade instructions in this guide to update the firmware.