Microsoft STOREXPRESS DSE4XM1 - Manual (Page 36)

March 10, 2009 Dolphin Interconnect Solutions 36
www.dolphinics.com
To re-enable Auto Attach at boot time, refer to the section on Enabling Auto Attach.
3.4 Manual Installation Procedures
The Windows Setup program should install your needed driver and software. However,
if the driver does not install, you can perform a manual install (or upgrade) using the
steps below for either Windows XP Pro/Server 2003 or Windows Vista/Server 2008.
3.4.1 Manual Install on Windows XP Pro or Windows Server 2003
Windows Driver Wizard will automatically detect the new ioDrive and start to locate its
driver after you restart the system. To complete the install:
1. Windows will ask you to locate the software driver.
2. If you have not done so, download and run the ioDrive Windows Setup program
from http://www.dolphinics.com/support .
3. Return to the Update Driver dialog.
4. Click Browse my computer for driver software. The Setup program will ask you
for a path to search.