Motorola D1010 - Manual (Page 13)

Using the phone 13
End a call
1. Press
>
.
After you hang up, the duration the phone is off-hook is displayed for 5
seconds.
NOTE
If auto hang-up is on (see page 21) simply replace the handset on the
base to end the call. The default setting is ON.
Switch handset on/off
1. Press and hold
>
until the handset switches off.
2. Press and hold
>
again to switch the handset back on.
Call a second external number
Put an external caller on hold to make a second external call. You can
then switch between both callers or hold a 3-way conference call.
1. During your call, press
m
. Scroll
d
to INIT 2ND CALL .
2. Press
m
.
- Display shows CALLING R
3. Enter the second number.
4. When your second caller answers, press
m
to open the option
menu:
CONFERENCE – press
m
to initiate a 3-way with an external caller
and internal caller.
SWITCH CALLS – press
m
to switch between the two callers.
5. Press
>
to hang up.
Intercom
This feature is only available when there are at least 2 registered
handsets. It allows you to make internal calls, transfer external calls from
one handset to another and use the conference option.
Call another handset
1. Press
I
.
• If you have two handsets, the other handset is called automatically.
• If more than two handsets are registered to the base, their numbers
are displayed, e.g. 2345* . Enter the number of the handset you want to
call or press
*
to ring all handsets.
2. Press
>
to hang up.
NOTE
If the handset does not belong to D1000/1010 range, this function may
not be available.
Transfer an external call to another handset
1. During an external call, press
I
.
- Your caller is put on hold.
2. Enter the number of the handset you want to call or press
*
to ring
all handsets.
- If there are only two handsets, the other handset is called
automatically.
3. When the other handset answers, announce the caller then press
>
to transfer the call. If the other handset does not answer, press
I
to talk to your caller again.
Three-party conference call
1. During an external call, press
I
.
- Your caller is put on hold.
2. Enter the number of the handset you want to call or press
*
to ring
all handsets.
- If there are only two handsets, the other handset is called
automatically.
3. When the other handset answers, announce the call then press and
hold
I
to connect both calls. If the other handset does not
answer, press
I
to talk to your caller again.
4. Press
>
to hang up.
Voicemail
If you have subscribed to your network’s voicemail service (if available),
your D1011 displays
when you have a new message. Depending on
your country and network services, the voicemail number may be pre-
stored in your handset for one touch dialling using the
1
button.