Motorola D1010 - Manual (Page 24)

24 Advanced settings
3. Enter the 4 digit master PIN and press
m
.
- Display shows the registered handset numbers.
4. Scroll
u
or
d
to select the handset you want to delete and press
m
.
- UNREGISTERED is displayed on the handset screen.
PIN
The 4-digit master PIN is used when registering or unregistering a
handset and when changing some settings on your D1011. The default
setting is 0000. You can change this PIN for more security.
1. Press
m
, scroll
d
to ADVANCED SET and press
m
.
2. Scroll
d
to PIN . Press
m
.
3. Enter the current 4 digit master PIN and press
m
. (Default setting
0000).
4. Enter the new PIN and press
m
.
NOTE
Make a note of your PIN. If you forget your PIN you will need to reset
your product.
Reset
This will reset your D1011 to its default settings.
1. Press
m
, scroll
d
to ADVANCED SET and press
m
.
2. Scroll
d
to RESET UNIT . Press
m
.
3. CONFIRM? is displayed. Press
m
.
NOTE
Entries stored in the phonebook and new answer machine messages are
retained.
Default settings
Handset name Handset
Key tone On
First ring On
Auto pick up On
Auto hang up On
Ringer melody Melody 1
Ringer volume High
Earpiece volume 3
Phonebook Unchanged
Call log
Empty
Redial list Empty
Master PIN 0000
Keypad lock Off
Clock 00:00
Alarm Off
Dial mode
Tone
Answer Machine On
Answer Mode Answer & Record
Outgoing message Pre-defined
Ring delay 15 seconds
Remote Access On
Handset screening Off
Base screening On