Magnadyne MARKSMAN X11 - Manual (Page 18)

18
Remote LCD Icons
Armed Mode
Vehicle is in armed mode
Car Jack Mode
Car jacking mode is activated
Hood Trigger
Hood is illegally opened (Zone 1)
Trunk Trigger
Trunk is illegally opened (Zone 2)
System Trigger
Time Monitor
Melody Mode
Remote control alert user
through melody sound
Channel #6 is Activated
Channel #7 is Activated
Channel #5 is Activated
Channel #4 is Activated
Channel #3 is Activated
Engine Running
Your vehicle’s engine is running
Alarm Alert
You have set morning
alarm call
Low Battery
You have to replace the remote
controls battery
Power Save Mode
Saves the battery power
Hidden Alarm Mode
Your vehicle is in armed with
hidden alarm mode
Remote Transmission
You are transmitting the signal to
the control unit
Door Open Warning
Doors are illegally opened
(Zone 3)
Ignition Trigger
Ignition switch is illegally turned
on (Zone 5)
Engine Cranking
Your vehicle’s engine is cranking
by remote control
Timer Control Start
Engine start automatically at the
same time next day or 2/3 hours.
Count Down Timer
Reminder when time
is up for parking
Button Lock
Disable the transmission
function temporarily
Temperature Monitor
Indoor temperature of your
vehicle
Valet Mode
All the function shall be
temporarily on hold
In-Range Indicator
You are within the remote
control range
Sensor Trigger
Trigger on sensor 1 (zone 4) or
optional sensor 2 (zone 6)
Warn Away Trigger
Warn away trigger on sensor 1
or optional sensor 2
Vibration Mode
Remote control vibrates when
the system is triggered
Driver Paging
Someone is paging you in front
of your vehicle