MITSUBISHI ELECTRIC Mitsubishi LCD Projector FL7000U - Manual (Page 45)

EN-45
Specifi cations
The specifi cations and outside appearance of the projector are subject to change without prior notice.
Type LCD projector
Model FL7000U
Display technology 1.1-inch LCD panel: 3 pieces (for R,G,B)
Pixel: 1920 x 1080 = 2073600 pixels
Total 6220800 pixels
Active pixel rate: 99.99% or more (each panel)
Projection lens F 1.8 - 2.1 f= 51 - 64 mm
Light-source lamp 275 W
Image size (projection
distance) 60” min. to 250” max. (projection distance 2.6 to 11.2 m)
Maximum
resolution Computer
signal Maximum resolution: 1920 x 1080 dots (Compressed in the case of 1600 x 1200 dots)
Panel resolution: 1920 x 1080 dots
Video signal NTSC/PAL/SECAM/4.43NTSC/PAL-M/PAL-N/PAL-60
Component
signal 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Panel resolution: 1920 x 1080 dots
Computer/component video
input [Signal type] [Terminal type] [Line]
Analog RGB Mini D-SUB 15-pin 1
Analog RGB 5 BNC 1
Digital RGB DVI 1
Video input [Signal type] [Terminal type] [Line]
Video input RCA / BNC 1
S-video input S / 2 BNC 1
Audio input [Signal type] [Terminal type] [Line]
RGB/Component Stereo mini jack (ø3.5) 2
Video RCA (L, R) 1
S-video RCA (L, R) 1
Monitor output [Signal type] [Terminal type] [Line]
Analog RGB Mini D-SUB 15-pin 1
Audio output [Signal type] [Terminal type] [Line]
RGB/Component Stereo mini jack (ø3.5) 1
Speaker 10 W Mono Round type ø4.5 cm x 1
Control terminal/others RS-232C (D-SUB 9-pin), USB, LAN (RJ-45), REMOTE IN/OUT
Operating temperatures +41°F (+5°C) to +104°F (+40°C)
Rated voltage AC100 - 240 V, 50/60 Hz
Power consumption 4.4 A
Dimensions (not includeing
protrusion) 371 mm (W) x 207 mm (H) x 434 mm (D) (projector only)
443 mm (W) x 207 mm (H) x 434 mm (D) (including the terminal cover)
Weight 9.8 kg (projector only), 10.5 kg (including the terminal cover)
Others S-video input Luminance signal: Vp-p=1.0 V 75 Ω (negative sync)
Chrominance signals: Vp-p=0.286 V 75 Ω (burst signal)
Video input Vp-p=1.0 V 75 Ω (negative sync)
Component
video input YC
B
C
R
: Vp-p=1.0 V 75Ω (Y) (negative sync)
Vp-p=0.7 V 75 Ω (C
B
, C
R
)
Analog input RGB: Vp-p=0.7 V 75 Ω (negative sync)
YC
B
C
R
: Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (C
B
, C
R
)
HD/CS: TTL-level (negative or positive polarity)
VD: TTL-level (negative or positive polarity)
Digital input (DVI) DVI-D interface (TMDS single link) with HDCP
Audio input 350 mVrms, 10 kΩ or more
Replacement part (option/not included in the box)
Spare lamp: VLT-XL6600LP
Option lenses: OL-X500SZ, OL-X500LZ, OL-X500TZ, OL-X500FR(F)/OL-X500FR*
Front cabinet: CA-XL6600(FR)*
*: Use OL-X500FR and CA-XL6600(FR) in combination.