Minolta CF910 - Manual (Page 151)

5-1
Sett
ing
t
h
e
Utilit
y Mo
d
e
Chapter 5
1. Default Settings
The Default Settings refer to the copying function settings established when the copier is turned ON or
the Panel Reset key is pressed. The Utility mode lets you change the default settings.
Default Settings Changing Procedure
Press the Utility key.
Touch .
Select either or
.
Touch .
Useful Tips
• When you select , the
settings made on the control panel are the
default settings.
• When you select , the
settings made in the factory become the default
settings.
1
Utility
Job Recall
1154O011CA
2 Default Settings
1154P412CA
3 Current Settings
Factory Settings
1154P413CA
4 OK
Current Settings
Factory Settings