Minolta CF910 - Manual (Page 66)

3-34
5. Color Adjust Mode (Basic)
M
a
ki
ng
C
o
pi
es
Chapter 3
Color Adjust Procedure (Basic)
Touch the key and select the item
for adjustment.
Touch the Test Print key.
(Ex.: When “Sharpness” is selected)
Position the image area in the original you
want to check for color in the Test Area on
the Glass.
Press the Start Key. This causes the copier to
output a sample copy showing seven images,
each representing a different level of
adjustment for the selected item.
Select the sample you like best, then touch
.
Place the original in position again and press
the Start Key.
1 Basic
1154P141CA
2
1154P258CA
3
1154P277EA
4
5
OK
1154P158CA
6