Midland Radio RG2W or RG2B User Manual
Page 12
Page 12
3.5 Installation of the antenna/electromagnetic exposure
For optimal radio settings and minimal user exposure to electromagnetic radio
frequency energy, ensure that:
•
The antenna is connected to the transceiver and is properly installed.
•
The antenna is situated away from people and is positioned at least three feet
from the transceiver and microphone.
•
The connector is a standard PL259 (male UHF).
3.6 Mounting of Microphone
To install the microphone mount, look first for a mounting point close to the
transceiver. The distance between the transceiver and the wall mount must be less
than the length of the microphone cable.
,
Do not pull excessively on the microphone cord.
This part is important to the correct operation of
the radio: over time, pulling may damage the cord
and impede the user from transmitting.