Midland Radio RG2W or RG2B - Manual (Page 25)

Page 25
9.9 “ZONE” (Adjustment of UTC time deviation)
The user can program the time deviation with respect to the UTC time so the
transceiver’s display will show the time for the current time zone.
1. Press the function key “DSC”.
2. Press the function key “Menu”.
3. Press the function key “More”.
4. Press the function key “ More”.
5. Press the function key “Zone”.
6. The
display will show
7. Pressing the function keys “+” or “–“ will set the desired deviation.
8. Acting with the function key ◄ will activate or eliminate the visualization of the
time data on the display.
9. Confirm by pressing one of the following buttons: C , 16, function key DSC, or
PTT.

This setting remains stored on the Eeprom, therefore REGATTA 2 will maintain the same
settings when the radio is turned on again.
9.10 MMSI (Setting of personal MMSI code and MMSI group
code)
This function allows the user to insert their personal MMSI identification code
assigned by an appropriate authority.
,
Be careful to insert the correct personal MMSI code. Once the code has been
saved, it cannot be modified.
1. Press the function key “DSC”.
2. Press the function key “Menu”.
3. Press the function key “More”.
4. Press the function key “MMSI”. The display
will show:
5. To insert the personal MMSI code press the function key to the right under the
arrow corresponding to the script “DSC”. The display will show the message
“Enter MMSI".
6. Insert the 9 digits, for example 900000000 and press the E-button in order to
confirm, now on the display appears:
7. To program the MMSI group code, press the function key corresponding to “►”
situated right below.
8. On the display will appear the message “Enter Group MMSI”, now program 8
numbers (the first fixed number is 0 (zero)) and confirm by pressing the E-
button.

It is possible to change the MMSI group code whenever you want, while the personal
MMSI code can be inserted only one time; for this reason, we recommend to pay
attention.

If you have accidentally inserted an incorrect code, you will have to return the device to
your approved vendor for a complete reset.
10 MAINTENANCE
10.1 Maintenance and warnings
REGATTA 2 is a marine VHF transceiver that conforms to IP54 standard, making
the transceiver very reliable when used correctly.
The device was designed so as to avoid requiring maintenance. To keep your
transceiver in optimal operating conditions:
,
Never open the device (transceiver or microphone) as this may compromise the
water resistant seal.
,
If the device becomes dirty or dusty, do not use alcohol, solvents or abrasives to
clean it. Use only a soft cloth, slightly dampened with water. For more persistent
cases, use a mild detergent.
Fig. X
Fig. Y
Fig. Z