Mabe Canada JGB918 - Manual (Page 34)

The oven door must be closed and all controls set correctly for the cycle to work properly.
How to Delay the Start of Cleaning
Make sure the clock shows the correct time
of day.
If your model has a latch, latch
the door.
Touch the SELF CLEAN pad.
Using the number pads, enter the
desired clean time.
Touch the DELAY START pad. The
earliest start time you can set will
appear in the display.
Using the number pads, enter the
time of day you want the clean cycle
to start.
Touch the START pad.
On models without a door latch, the door
locks automatically. The display will show
the start time. It will not be possible to
open the oven door until the temperature
drops below the lock temperature and the
LOCKED DOOR light goes off.
The oven shuts off automatically when the
clean cycle is complete.
When the LOCKED DOOR light is off,
slide the latch handle to the left as far
as it will go and open the door. If your
range does not have a latch, the door
will unlock automatically.
■
The words LOCK DOOR will flash and the
oven control will signal if you set the
clean cycle and forget to close the oven
door or forget to latch the door on
models with a latch.
■
To stop a clean cycle, touch the
CLEAR/OFF pad. When the LOCKED DOOR
light goes off indicating the oven has
cooled below the locking temperature,
unlatch the door (on models with a
latch) and open the door.