MicroNet Technology SP648B - Manual (Page 18)

12
CONFIGURATION
Through the Web Browser you can configure the Switch such as VLAN, Trunking,
QoS… etc.
With the attached Web Management Utility, you can easily discover all the Web
Management Switch, assign the IP Address, changing the password and upgrading the
new firmware.
Installing the Web Management Utility
The following gives instructions guiding you through the installations of the Web
Management utility.
1. Insert the Utility CD in the CD-Rom Drive.
2. From the Start menu on the Windows desktop, choose Run.
3. In the Run dialog box, type D:\Web Management Utility\setup.exe (D:\ depends
where your CD-Rom drive is located) and click OK.
4. Follow the on-screen instructions to install the utility.
5. Upon completion, go to Program Files -> web_management_utility and execute the
Web Management utility. (Figure 6.)
Figure 6. Web Management Utility
The Web Management Utility was divided into four parts, Discovery List, Monitor List,
Device Setting and Toolbar function, for details instruction, follow the below section.