MicroNet Technology SP648B - Manual (Page 31)

25
To restore a current setting file to the device, you must specify the backup file and press
“Restore” button to proceed the setting of the recorded file.
Figure 28. Backup Setting
Note: when restoring a recorded file, the current password will not be erased.
Reset Setting
The Factory Reset button helps you to reset the device back to the default setting from the
factory. Be aware that the entire configuration will be reset, the IP address of the device
will be set to default setting 192.168.0.1.
Figure 29. Reset Setting
Logout
When press this function, the web configuration will go back to first Login page.
Figure 30. Logout