MicroNet Technology SP648B - Manual (Page 21)

15
The factory default password is "admin".
Figure 9. Configuration Setting
Password Change: You can use this Password Change when you need to change the
password, fill in the password needed in the dialog box and press “Set” button to proceed
the password change immediately.
Figure 10. Password Change
Firmware Upgrade: When the device has a new function, there will be a new firmware
to update the device, use this function to update.
Figure 11.
Web Access: Double click the device in the Monitor List or select a device in the Monitor
List and press this “Web Access” button to access the device in Web browser.