Multitech PROXYSERVER MTPSR1-120 - Manual (Page 30)

30
Dual Ethernet ProxyServer User Guide
Download Firmware Update
This application allows you to update the firmware of the ProxyServer. This may be necessary in
the case of repair or upgrade. To download the firmware update, choose Download Firmware
Update from the Firewall Program Group, and the Open dialog box is displayed (if the
ProxyServer is running, you will be queried to reboot to update firmware; click OK to proceed and
the Open dialog will be displayed).
By default, the Firewall software will display the proper firmware from the Firewall folder. Double
click on this file in the File Name list.
The Downloading Code dialog is displayed, which includes a status bar to monitor the download.
When the download is complete the ProxyServer will reboot. This process will take several
minutes. After rebooting, you will be returned to Windows.
Uninstall Firewall Configuration
Selecting Uninstall Firewall Configuration will allow you to completely remove all the components
of the Firewall Program Group. Upon selecting this option your will be queried for confirmation.
Click Yes to continue with the uninstall, or click No to abort.
Note: You will not be able to use the ProxyServer without Firewall Configuration. If you remove
the components, you will need to reinstall the software. Refer to your
ProxyServer Firewall Quick
Start Guide for installation instructions.
WAN Device Configuration
If you have an external WAN device connected to the WAN port of the ProxyServer, this
application will open the Firewall Print Console, a terminal emulation program, that will allow
configuration of the external device.