Multitech PROXYSERVER MTPSR1-120 - Manual (Page 37)

37
Chapter 5 - Remote Configuration and Management
Enabling PPP/SLIP
If you wish to use Point to Point Protocol (PPP) or Serial Line IP Protocol (SLIP) on the WAN
port, you can enable in the PPP/SLIP menu. In order to configure these options, you must first
enable the WAN port.
To enable the WAN port, click on the WAN button in the Firewall Setup menu. The WAN Setup
dialog box appears.
Click on the Port Enable check box enable the WAN port. Click OK.
You are returned to the Firewall Setup menu. Click on PPP/SLIP. The PPP Port Setup menu is
displayed.
Enabling PPP
If you wish to configure the port for use with PPP, click on the Enable check box in the PPP
group. Enter a valid User Name and Password and verify (or change) the Periodic Timer and
Number of Retries (for definition and parameters of a specific field, refer to the on-line help).
By default, Dial On Demand is enabled. If you do not wish to use this feature, click on the Enable
check box in the Dial On Demand group to disable it.
When you have finished the configuration, click OK. You are returned to the Firewall Setup
menu. Click Download Setup to save the new configuration to the ProxyServer.