Monster Power HTFS500 POWERCENTER - Manual (Page 13)

8
MONSTER HTFS 500 / HTFS1000 POWERCENTER FEATURES
1. “ On/Off Button“ (HTFS1000 only): Press to turn on/off the switched outlet (labeled as HDTV).
Note: The ON/OFF button has no effects on the unswitched outlet (labeled as ACCESSORY),
which remains on as long as the HTFS1000 is plugged into an active AC outlet.
2. “ Reset/Off“ Switch (HTFS500 only): Switch to turn on/off both AC outlets on the HTFS500.
Note 1: This RESET/OFF switch is also a circuit breaker.
Note 2: Both AC outlets (labeled as HDTV and ACCESSORY) on the HTFS500 are switched
(turned on/off by the RESET/OFF switch).
3. “ Voltage/Amperage“ Button (HTFS1000 only): Allows you to view either the input voltage (in volts, V)
or current usage (in amps, A) of your system.
4. “Ground OK” Indicator: Indicates the PowerCenter is plugged into a properly grounded 120V AC outlet.
5. “Protection On” Indicator: Indicates Monster surge protection circuitry is functioning properly.
6. “ Wiring Reversed” Indicator (HTFS1000 only): Indicates the line-neutral polarity is incorrect on the AC outlet
that powers the PowerCenter. If the indicator is lit, unplug the PowerCenter and consult your local power company
or a qualified electrician.
7. “Clean Power On” Indicator (HTFS1000 only): Indicates Monster Clean Power circuitry is functioning properly.
8. “ Switched On” Indicator (HTFS1000 only): Indicates that the component plugged into the switched outlet
(labeled as HDTV) will receive AC power when the ON/OFF button is pressed.
9. Input Voltage (V) / Current Usage (A) Digital Display (HTFS1000 only): In conjunction with the VOLTAGE/
AMPERAGE button, indicates either the input voltage (in volts, V) or current usage (in amps, A) of your system.